![]() IMPORTANT! Right and left hand are always determined from inside the garage looking out. ![]() Continue sliding the opener power head to the center of the torque tube and plug the motor into the opener power head. ![]() Align the right hand bearing with the torque tube and slide the opener power head completely onto the torque tube until the torque tube exits the opener power head’s right hand bearing. NOTE: Do not force the opener onto the torque tube if misalignment occurs.Ĭontinue sliding the opener power head onto the torque tube. As the right end of the torque tube enters the internal (black) sleeve, rotate the opener back and forth slightly to help aid alignment. 'The Max weight for the iDrive Pro is 300 pounds'. However, the Spec Sheet for iDrive indicates the door 'must not weight more then 225 pounds'. The iDrive standard instructions claim that the a 'door must not weight more then 304 pounds'. Once aligned, slide the opener power head onto the right hand end of the torque tube. Upon inquiry with Wayne Dalton via email exchange, an 18 foot door weighs about 275 pounds. Look into the opener’s left side to ensure the left hand bearing and the internal (black) sleeve are aligned with the torque tube profile. Opener will not slide over a torque tube label.Īttempting to slide opener over the left end of the torque tube can damage the internal electronics. Lay the torque tube on the floor (inside garage) in front of the door with the labeled end to the left.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |